Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Minneapolis?
Chimney cap installation in Minneapolis typically costs $225-$575, and crown repair or replacement typically runs $450-$1,400 depending on the size of the crown and how much masonry work is needed. A basic cap replacement (cap only, existing base reused) usually falls at the low end at $150-$300. Most Minneapolis homeowners spend $600-$900 when a cap and crown are addressed together in a single visit.
Those figures cover the job from inspection through completion. Northwind Chimney Sweep works with professional-grade components from DuraFlex, Gelco, Olympia Chimney, Famco, and Copperfield, so the cap and crown on your Minneapolis home are matched to your flue and your chimney’s draft needs rather than pulled off a hardware-store shelf.
Key Takeaways
- Cap installation: $225-$575. Crown repair: $450-$1,400. Cap and crown together: most often $600-$900.
- A cracked crown lets water into the masonry; that water damage is what turns a $500 repair into a $3,000 rebuild.
- Cap sizing depends on flue type and count, so two Minneapolis homes on the same block can carry very different cap costs.
- We inspect before we recommend. The written estimate sets the final price, and it’s free.
- Call (844) 834-2087 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cap & Crown Cost Breakdown (2026)
The table below reflects typical Minneapolis pricing for cap and crown work. These are honest ranges, not teaser numbers. What you actually pay depends on your chimney’s construction, access, and condition, and the written estimate you receive is what locks in the final price.
| Line Item | Typical Cost Range | Notes |
|---|---|---|
| Cap replacement (cap only, existing base reused) | $150-$300 | Common when the base is sound and only the top is failing |
| Single-flue cap, installed with new base | $225-$400 | Lifetime-style stainless or powder-coated steel |
| Multi-flue cap (2-3 flues) | $400-$575 | Larger footprint, custom sizing |
| Crown repair (crack sealing, patch) | $450-$800 | Minor to moderate cracking |
| Crown replacement (full rebuild) | $800-$1,400 | Cast-in-place or pre-cast, sized to the chimney |
| Crown with new overhang and drip edge | $1,100-$1,400 | The overhang is what actually sheds water past the masonry |
| Cap and crown combined, same visit | $600-$900 | The most common package in Minneapolis |
| Animal guard or spark screen add-on | $60-$150 | Often fitted during the same visit |
What pushes a Minneapolis cap and crown job toward the top of these ranges? Flue count is the first lever. A single-flue chimney takes a standard cap; a chimney with three flues needs a custom footprint, and the price reflects that. Crown size and shape come next. A simple square crown is straightforward; a large crown with multiple flue openings and a proper overhang takes more time, more material, and more skill. Access matters too, especially on the steep-pitch older homes common around Minneapolis. If the crown is cracked through to the flue tile or the masonry beneath it has already started to spall, the job grows. None of that gets decided until someone is actually on the roof looking at it, which is why we inspect before we recommend.
What Affects Chimney Cap & Crown Pricing in Minneapolis
Two homes with the same footprint can carry meaningfully different cap and crown costs. Here are the factors that move the number, with a Minneapolis eye on each.
- Flue count and configuration. A wood-burning fireplace with one flue is the simplest case. A gas appliance, a furnace flue, or a second fireplace means multiple terminations, and each one needs a cap opening sized correctly. More flues, more material, more time.
- Chimney condition at inspection. A cap that failed two winters ago often takes the crown down with it. Water gets behind a loose cap, freezes in the masonry, and opens cracks. The inspection tells us whether we’re replacing a cap, repairing a crown, or rebuilding one.
- Access and roof pitch. Minneapolis has a lot of older housing stock with steep, complex rooflines. A chimney on a walkable low-slope roof is a fast job. A chimney tucked behind a dormer on a steep pitch needs more time and more care, and that shows up in labor.
- Material and brand selection. We work with professional-grade caps from Famco, Gelco, Olympia Chimney, and Copperfield. A properly sized stainless or powder-coated steel cap costs more than a stamped box-store cover and lasts far longer. That’s the difference between a cap that survives a Minneapolis winter and one that rusts through in a few seasons.
- Crown type and size. A cast-in-place crown sized to the chimney with a real overhang costs more than a thin mortar skim. The overhang is what makes the crown work: it throws water off the masonry instead of letting it run down the face and into the brick.
- Concurrent repair needs. If the inspection turns up a liner issue, we can address it under the same visit rather than sending you to a separate contractor. HeatShield ceramic resurfacing, for example, can restore a degraded liner without a full reline, which often saves both money and disruption. One crew from inspection to repair keeps the accountability in one place.
How to Save on Chimney Cap & Crown in Minneapolis
Cap and crown work isn’t the place to chase the lowest bid, but there are real ways to keep the cost down without cutting into what actually protects your home.
Catch the crown early. A hairline crack sealed now costs a fraction of a crown rebuild later. Water damage compounds: the freeze-thaw cycle in a Minneapolis winter widens cracks, and once moisture gets into the masonry, you’re paying for brick, not crown. An inspection that catches a hairline crack at $450-$800 beats a rebuild at $800-$1,400, and both beat structural masonry repair.
Pair the work. If the cap is failing and the crown is cracking, doing both on the same visit keeps you at the $600-$900 range rather than paying for two separate trips. The same applies to animal guards or spark screens: adding one during cap installation costs $60-$150 rather than a separate call.
Right-size the cap to the flue. An oversized cap that doesn’t match the flue can hurt draft and cost you more than the cap itself in performance issues. Famco and Gelco make caps sized to standard flue dimensions, and getting the sizing right the first time avoids a re-do.
Get a real inspection behind the estimate. The free estimate is only as good as the diagnosis. We inspect to NFPA 211 standards, the benchmark buyers and insurance companies rely on at closing, so the recommendation is grounded in what’s actually happening on the chimney, not a guess from the ground.
Call (844) 834-2087 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Minneapolis?
A chimney cap in Minneapolis typically runs $225-$575 installed, with a single-flue cap at $225-$400 and a multi-flue cap at $400-$575. A cap-only replacement that reuses the existing base usually lands at $150-$300. The estimate sets the final price, so call (844) 834-2087 for an exact figure. Estimates are free.
How much does chimney crown repair cost in Minneapolis?
Chimney crown repair in Minneapolis typically costs $450-$1,400, with minor crack sealing at the low end and a full crown rebuild with a proper overhang at the top. Most crown repairs fall in the $450-$800 range. The written estimate sets the final price. Call (844) 834-2087 to schedule yours.
Is it cheaper to repair a crown or replace it?
Repair is cheaper when the crown is only cracked: $450-$800 versus $800-$1,400 for a replacement. Replacement becomes the better value once the crown has lost its overhang, is separating from the chimney, or has failed across multiple flues. An inspection tells you which case you’re in. Call (844) 834-2087 for a free estimate.
Why does a chimney cap and crown cost more in some Minneapolis homes?
Multi-flue chimneys, steep rooflines, and crowns that have already damaged the masonry below push costs toward the top of the range, up to $1,400 for a full crown rebuild. Complex access on older Minneapolis roofs adds labor time. The written estimate accounts for all of it, so there are no surprises. Call (844) 834-2087 for a free estimate.
Can I get a same-day chimney cap or crown estimate in Minneapolis?
Yes, same-day estimates are often available. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (844) 834-2087 to get a free estimate on the books.
Why Minneapolis Homeowners Call Northwind Chimney Sweep
Cap and crown work looks simple from the ground and isn’t. The right cap is sized to the flue, the right crown is pitched and overhung to shed water away from the masonry, and the right repair is built to last between visits. We work with six professional-tier brands: DuraFlex and Copperfield for liner systems, HeatShield for ceramic liner restoration, and Famco, Gelco, and Olympia Chimney for caps, venting, and draft management. That lineup means we’re matching the part to the system, not treating the cap as an afterthought.
Our technicians have up to 12 years of experience, and our chimney inspections align with NFPA 211 standards. All three phases of chimney care, sweep, repair, and inspection, are handled by the same crew, so you’re not handed off from the company that diagnoses to the company that fixes. The right liner for your flue type, professional-grade materials instead of hardware-store substitutes, and one crew from inspection to repair: that’s the standard on every job in Minneapolis.
You can learn more about Northwind Chimney Sweep and the way we work, whether your chimney is in a Minneapolis neighborhood or outside the city. If you’re ready to get pricing on a cap or crown, call (844) 834-2087 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Minneapolis market as of 2026. Northwind Chimney Sweep offers free estimates – call (844) 834-2087.
Written by the team at Northwind Chimney Sweep.
What Our Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Jason Anderson"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Lisa Ackerman"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Heather Whitaker